6
ENGLISH
4. Install the water separator (18) togeth-
er with HEPA-filter (19) into its former
place.
5. Install the motor block into its place and
close the latches (8).
6. Connect the flexible hose to the vacuum
cleaner, then insert the telescopic tube
(2) into the flexible hose, and attach the
nozzle you need (1, 14, 15, 16) to the tel-
escopic tube.
7. For your convenience while operating
the vacuum cleaner you can put the ad-
ditional nozzles at the places for nozzles
installation (10).
8. Push ON/OFF button (7) to switch the
vacuum cleaner on
.
9. After the cleaning is completed press ON/
OFF button (7) to switch off the vacuum
cleaner and then unplug its power cord
from the wall outlet
.
Maintenance
(Pic.
7
)
-
Switch off the vacuum cleaner and unplug
the power cord from the wall outlet
.
- Rise the latches (8) and detach the motor
block.
- Take the water separator (18) together
with HEPA-filter (19) out of the dust col-
lecting container (9).
- Take the air flow dispenser (17) out of the
dust collecting container (9).
- Pour the water out of the dust collecting
container (9); use the transportation han-
dle (13) to carry the dust collecting con-
tainer (9) about.
- Clean the dust collecting container (9)
and air flow dispenser (17) with clean wa-
ter and dry it.
- Assemble the vacuum cleaner and store
it.
Notice:
It is recommended to change the water in
the dust collecting container (9) after each
time you use the vacuum cleaner.
Cleaning НЕРА-filter (Pic. 8)
Watch if HEPA-filter (19) is clean, as the ef-
fectiveness of the vacuum cleaner operation
depends upon it. Clean the filters no less
then four times a year or often (in case of
strong blocking). Change filters if required.
-
Switch off the cleaner and unplug it from
the wall outlet, detach the motor block,
and take HEPA-filter (19) out of it. Clean
the dust and dirt from the HEPA-filter.
- Wash HEPA-filter (19) under warm water
jet. (Pic. 9)
-
Do not use the dishwasher machine for
cleaning the filter
.
- Dry НЕРА-filter (19).
Do not use the hair
drier for drying the filter.
(Pic. 10)
- Install HEPA-filter into its place, and put
the motor block to its former position.
Motor block
-
Wipe the motor block housing with a damp
cloth
.
-
Do not allow any liquids dropping inside
the vacuum cleaner
.
-
Do not use any dissolvent or abrasive de-
tergents for cleaning the surface of the
vacuum cleaner
.
Technical specifications
Supply Voltage: AC 220 V ~ 50 Hz
Consumption power
: 1800 W
Suction power: 250 W
Specifications subject to change without
prior notice.
MINIMUM SERVICE LIFE - 5 YEARS
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Law Voltage
Regulation (73/23 EEC)
18321.indd 6
18321.indd 6
26.06.2007 17:27:43
26.06.2007 17:27:43