8
1DU00L5B-A.2
5
Frequently Asked Questions
Power button does not respond
•
Check the power cord to ensure that it is securely plugged
into the monitor base and also into the electrical outlet.
•
Ensure there is electrical power coming from the AC outlet.
Use another device to check for power.
•
Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
No image on the screen
•
Ensure that the s i g n a l c a b l e i s p r o p e r l y c o n n e c t e d
t o t h e d e v i c e g e n e r a t i n g t h e v i d e o s i g n a l s u c h
a s a D V R o r C o m p u t e r .
•
If using VGA, check the DB-15 signal cable connector on
both ends for bent or pushed-in pins.
•
If your signal generating device is a computer, the display
card should be properly seated in its card slot.
•
Ensure that the computer or image signal generating device’s
power switch is ON.
•
Ensure that the monitor's power switch is ON.
•
Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then plug the power cord into the AC
outlet again. This will reset the monitor and power supply.
Power LCD is RED (with no image on the screen)
•
Check the signal cable to ensure that it is properly
attached to the image generating device or graphics display
card.
•
If using VGA
,
Check the DB-15 signal cable on both ends
for bent or pushed-in pins.
•
Make sure the computer (or other device) is not in a
power-saving mode (move the mouse or press a key on the
keyboard).
No sound coming from the audio speakers
•
The audio cable should be connected to the lineout on the
audio card and the line-in on the monitor. Ensure that the
audio cable is properly connected.
•
Inspect the audio cable for any apparent damage. Double
check by switching to another audio cable to see if the
audio works.
