Vitek VTC-IRT40-2812, Руководство пользователя

Страница: 12 / 32

Operating Instructions
Setup menu can be accessed and controlled by OSD control joy stick on the
side of camera unit. Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Description of the joystick operation
1) SET Key (●) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down for about 1.5sec
2) UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move
the cursor up or down.
3) LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left
or right.
4) ‘
’
denotes the long press down straightly for about 2 seconds
Using OSD controller
(*) Works only when OSD menu is inactive.
Description of the D-ZOOM* adjustment
1) ▲ : Zoom In 2) ▼ : Zoom Out
Cover Open
Video Sub-out
Connector
OSD Control
Joy Stick
SUB-OUT
ZOOM
Description of Video format switch (TVI
↔
CVBS)
1) Selects the video output TVI or CVBS. Default position is TVI.
2) Switching the video format : ▲,▼, ▲,▼,
●
( long push 1~2 sec.)
Do not power off the camera after switching a video format immediately.
It can be cause of crashing a flash memory.
12 13