Vitek VTC-C770/WDR, Руководство пользователя

Страница: 24 / 48

ENVI Series IP Configuration Manual
________________________________________________________________________________
24

SNMP
SNMP (Simple Network Management Protocol) is compatible with both SNMPv1 and SNMPvec.
Settings for using SNMP (Simple Network Management Protocol) are as follows:

SNMP Listen Port: The port is for connecting external devices when system operates as a
SNMP client. SNMP is not used by setting 0 value.

SNMP Trap Destination IP : Set the SNMP Trap Destination IP.

SNMP Trap Destination Port: Set the SNMP Trap Destination Port. SNMP is not used by
setting 0 value.

Multicast

Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255. The
selection can be used only when media protocol is set to Multicast. The Multicast menu is used
for the Multicast connection request from a decoder or CMS / NVR software to transmit
Multicast stream to the decoder or CMS / NVR software. The multicast address must be the
same for the system to be connected using multicast protocol.

Check IP Disable: If
“Check IP Disable” is selected, IP Server will skip to check its own IP. In
Fixed IP mode, the set IP will be registered on DDNS server. In DHCP mode, the Allotted IP will
be registered on DDNS server.
Simple Network Management Protocol (SNMP) is used by network management systems to
communicate with network elements. SNMP lets TCP/IP-based network management clients
use a TCP/IP-based internetwork to exchange information about the configuration and status of
nodes. SNMP can also generate trap messages used to report significant TCP/IP events
asynchronously to interested clients. For example, a router could send a message if one of its
redundant power supplies fails or a printer could send an SNMP trap when it is out of paper.