Vitek VTC-C2BTS1, Руководство пользователя

Страница: 17 / 24

Operating Instructions
If set to ON, motion is displayed on the monitor by means of digital effect.
Sets the detection sensitivity for motion. High value increases the sensitivity
to detect small motion easily. Too low will cause erratic detection by
tree leaves or light level changes.
MOTION
> 1. MOTION
2. SENSITI.
3. ALARM
4. HOLD TIME
5. RETURN
SPECIAL
1. PRIVACY ZONE
> 2. MOTION
3. HLC
4. RETURN
5-2-1. MOTION : OFF, ON
5-3-1. HLC : OFF, ON
5-2-2. SENSITI. : 0~255
Set to OFF, TRACE, ICON for motion alarm display.
5-2-3. ALARM : OFF, TRACE, ICON
Sets the interval time from the starting of motion operation until being ready
for the next motion operation.
5-2-4. HOLD TIME : 1~10 SEC
5-2. MOTION
5-3. HLC
Selects the mask color pattern Area 1 or 2
5-1-2. MASK PAT. : Off, Black, Gray, White
5-1-3. SX, EX. : Set the X-position or size for the selected arear (Start-X, End-X)
5-1-4. SY, EY. : Set the Y-position or size for the selected arear (Start-Y, End-Y)
: OFF
: 32
: OFF
: 1SEC
HLC (High Light Cut out) is used to black out bright areas, in order
to enable a clear visual image of objects.
Set to ON, select window for HLC.
5-3-2. MASK VALUE : 0~255
Set the transparency rate for the HLC mask.
17