Vitek VTC-C2BMS2, Руководство пользователя

Страница: 14 / 28

Operating Instructions
If CVBS video is enabled through ANALOG OUT or Sub-out port, WDR
and 3D-NR functions are disabled in all video outputs.
It should be considered when installer adjusts the video with installation
monitor via CVBS video signal.
4-3. WDR (Wide Dynamic Range)
4-3-1. MODE : Selects WDR mode normal or ROI setting.
• NORMAL: WDR function applies full screen.
• ROI (Region Of Interest) : Sets specific area of WDR by window setting.
Select window zone number from 0 to 3 and window use set to on.
Then the window zone can be modified for position and size.
When part of an image is extremely dark but another part is so bright you
can't see any details WDR will even the image out.
ROI
WINDOW ZONE
WINDOW USE
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
0
ON
469
194
739
688
WDR
MODE
TARGET-BRT
WEIGHT
RETURN
ROI
MIDDLE
MIDDLE
4-3-3. WEIGHT : LOW, MIDDLE, HIGH
Selects the WDR value of the target area in MODE.
4-3-2. TARGET-BRT : LOW, MIDDLE, HIGH
Selects the brightness value of the target area in MODE.
14 15