Operating Instructions
FULL-HD MEGA-PIXEL CAMERA
16
• SENSITIVITY : Adjusts the detection sensitivity for motion.
Higher value increases the sensitivity to detect small motion easier. Too low
of sensitivity will cause erratic detection.
• H-POS, V-POS, H-SIZE, V-SIZE: Adjust the size and position of the detection
window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when
motion is detected and also enables MOTION OSD to ON.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM>ZOOM TARGET. Adjusting
◀
,
▶
(Joystick) for ZOOM TARGET varies the viewing angle to be zoomed when
motion occurs.
Set the video left and right and/or up and down by MIRROR/FLIP.
• STAY ZOOMING : Sets the duration time for zooming by Motion.
: MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message on screen.
5-3. MOTION
(default: OFF)
※
SMART MOTION ZOOM does not work in low light condition and BW.
• Set the direction of video by MIRROR/FLIP before SMART MOTION ZOOM
setting. Otherwise ZOOM TARGET could be different from your intention.
CAUTION
: Detects and compensates the white pixels which become defective.
Once CALIBRATE is selected, the pixel calibration is initiated with lens closed
and can not be canceled.
5-4. PIXEL DEFECT
(default: OFF)
• THRESHOLD : Defines the level of detection and low value detects more pixels.
Be sure to set the value so that the pixels are uniformly blinking over the entire
screen. Too low of value will get bad results because too many pixels are
detected as bad pixels and the maximum number of pixels for compensation
will be filled by the upper area.
• EXECUTE ‘
☟’
: Long pressing will execute the pixel calibration for the detected
pixels. Menu will exit automatically after compensation.
