Vitek VTC-BHOCRAZ, Руководство пользователя

Страница: 19 / 30

19
Operating Instructions
4-3. MOTION
(default: OFF)
.
4-4. PIXEL DEFECT
(default: OFF)
4-5. TITLE SET
¥ Set the direction of video by MIRROR/FLIP before SMART MOTION ZOOM
setting. Otherwise ZOOM TARGET could be different from your intention.
CAUTION
: MOTION can detect the changes in the motion window and displays the
results
in blocks and/or a text message.
• SENSITIVITY : Adjusts the detection sensitivity for motion.
Higher value increases the sensitivity to detect small motion easier. Too low
of sensitivity will cause erratic detection.
• H-POS,V-POS, H-SIZE and V-SIZE -
Adjust the size and position of the detection window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when
motion is detected and also enables MOTION OSD to ON.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM>ZOOM TARGET. Adjusting
◀ , ▶ (Joy-
stick) for ZOOM TARGET varies the viewing angle to be zoomed when
motion occurs. Set the video left and right and/or up and down by MIRROR/
FLIP.
SMART MOTION ZOOM does not work in low light condition and BW
• STAY ZOOMING : Sets the duration time for zooming by Motion.
: Detects and compensates the white pixels which become defective.
Once CALIBRATE is selected, the pixel calibration is initiated with lens
closed and can not be canceled.
• THRESHOLD : Defines the level of detection and low value defective pixels.
Be sure to set the value so that the pixels are uniformly blinking over the en-
tire screen. Too low of value will get bad results because too many pixels are
detected as bad pixels and the maximum number of pixels for compensation
will be filled by the upper area.
• EXECUTE ’: Long pressing will execute the pixel calibration for the detect-
ed pixels. Menu will exit automatically after compensation.
※
☟’