Vitek VTC-3516, Руководство пользователя

Страница: 6 / 25

5
4.2 Rear side view
5. Installation Instructions
•
Make sure the power is not applied before the installation.
• Once the camera is installed, you may first connect the low voltage (AC24V or DC12V) wire to the
camera power connector, then plug the AC adapter to the AC outlets to avoid an improper reset from
power jitter and possible damage from voltage surge.
5.1. Mounting the camera
1) Drill 4 holes into the wall or ceiling using the supplied template
2) Insert the
②
anchors into the drilled holes
3) Match ⓔ ( foot mount holes) to the drilled holes
4) Affix the mounting bracket by using
③
supplied screws
ⓛ
Focus adjustment
ⓚ Zoom adjustment
ⓛ ⓚ
Installation on Wall
Installation on Ceiling