7
5.3 Sunshield
Camera can be protected from the strong sun light by its own Sun shield.
Sunshield must be tightened enough to the body to avoid detaching of it by the wind.
5.4 Power connector
The VTC-IRE30/2810 can operate on either 24AC or 12VDC, dual voltage power.
Polarity free connection is acceptable, but follow the indication if possible.
6. SETUP Menu
6.1 In the menu
Setup menu can be accessed and controlled by OSD control joy stick on the side of the camera.
Five commands are available with the joy stick.
In the menu,
use
▲
,
▼
to move menu,
◀
,
▶
to change the settings and press
●
to select or enter.
The FACTORY DEFAULT in this manual may NOT be the same as the default values
set by the
FACTORY due to feature improvements or customer requirements.
To enter the menu, press
●
.
When the sunshield is fixed on camera body, usually
ⓒ
Fix screw for Sunshield
is located in center of
screw hole.
Adjust the sunshield back or forth according to the
wide or tele position of the lens.
If shades by the sunshield are seen on the image,
reverse the sunshield direction backside to front.
Joy stick
VIDEO
SUB-OUT
connector
SYMBOL descriptions for joystick operation;
1.
▲
,
▼
,
◀
,
▶
- Denotes the direction of
Joystick lever operation.
2.
●
- Denotes pressing down on the
Joystick lever
