OPERATION
QUICK START
Please connect your DVD player, subwoofer and speakers before you do the following.
1. Plug the AC cord to the wall socket.
Press the ON/OFF switch to power on the system located on the back of the subwoofer. The
STANDBY LED will light on, which indicates the POWER is ON.
2.Using your remote control, press the 5.1 CH button if the DVD player is hooked up to the
5.1CH in put on the back of the subwoofer.
3. If you hook up your player via 2CH to the AUX located on the back of the subwoofer, you
must press the AUX5.1 button on your remote control to get Surround Sound, To get
2CH,simply press theAUX2.1 button on your remote.
Note: TV's, CD's and most media output audio with 2channels, In order to enjoy a Surround
Sound effect, you must hook up your subwoofer and DVD player via AUX located in the back
of the subwoofer. Then press AUX5.1 button on the remote control, this will enable a Virtual
Surround Sound that will leave you with a real home surround theater experience.
Note: Switch between AUX2.1 & AUX5.1 or 5.1CH output by pressing the button on the
remote control. If you put the source from AUX, you must to select AUX2.1 or AUX5.1 output
on the remote control. If you put the source from 5.1 CH, you need to selects. 1CH output on
the remote control. If you are listening to a 2CH media, you will need switch the mode to AUX
5.1CH output on the remote control to switch on surround sound.
VOLUME CONTROL
1.Master volume is for controlling the master sound level. Low and High.
2.Front volume is for controlling the front sound level, Low and High.
3.Center volume is for controlling the center sound level. Low and High.
4.Surround volume is for controlling the surround sound level. Low and High.
5.Subwoofer volume is for controlling the subwoofer sound level. Low and High.
MUTE
Press the MUTE button to mute the sound.
Press the MUTE button again to unmute.
TROUBLESHOOTING GUIDE
Problem
Possible Cause and Remedy
No sound and display.
Poor connection from power plug and socket.
The Power button is set "off" or standby.
Check the amplifier fuse.
No sound but with display
The Volume knob is set to Min.
Check RCA cable.
No sound from the front
Poor connection or speaker cable (positive & negative)
speakers
is connected to one point.
Check RCA cable for loose connection.
No sound from the center
MODE is not set correctly. Reset correctly.
speaker
Center Volume is set to Min.
ЗАДНЯЯ ПАНЕЛЬ
1. ПРАВОЕ ГНЕЗДО ДЛЯ ДОПОЛНИТЕЛЬНОГО ОБОРУДОВАНИЯ
2. ГНЕЗДО ДЛЯ ПРАВОГО 5.1 CH ДИНАМИКА ФРОНТАЛЬНОГО ЗВУКА
3. ГНЕЗДО ДЛЯ ПРАВОГО 5.1 CH ДИНАМИКА ОБЪЕМНОГО ЗВУКА
4. ГНЕЗДО ДЛЯ ПРАВОГО 5.1 CH КАНАЛА САБВУФЕРА
5. ВЫХОД ПРАВОГО ДИНАМИКА ФРОНТАЛЬНОГО ЗВУКА
6. ВЫХОД ЛЕВОГО ДИНАМИКА ФРОНТАЛЬНОГО ЗВУКА
7. ВЫХОД ПРАВОГО ДИНАМИКА ОБЪЕМНОГО ЗВУКА
8. ВЫХОД ЛЕВОГО ДИНАМИКА ОБЪЕМНОГО ЗВУКА
9. ВЫХОД ДИНАМИКА ЦЕНТРАЛЬНОГО ЗВУКА
10. ЛЕВОЕ ГНЕЗДО ДЛЯ ДОПОЛНИТЕЛЬНОГО ОБОРУДОВАНИЯ
11. ГНЕЗДО ДЛЯ ЛЕВОГО 5.1 CH ДИНАМИКА ФРОНТАЛЬНОГО ЗВУКА
12. ГНЕЗДО ДЛЯ ЛЕВОГО 5.1 CH ДИНАМИКА ОБЪЕМНОГО ЗВУКА
13. ГНЕЗДО ДИНАМИКА ЦЕНТРАЛЬНОГО ЗВУКА
14. Кнопка включения и выключения ("Сеть")
15. ГНЕЗДО ПРЕДОХРАНИТЕЛЯ
16. ШНУР ПИТАНИЯ
8
13
РУССКИЙ
ENGLISH
VT-4022.qxd 05.11.03 17:18 Page 16
