Vitek VT-SRE Spire Elite, Руководство пользователя

Страница: 83 / 150

83
-
n/C (normal Closed) : it normally stays Closed. However, if an event occurs, it will switch to Open.
i
DURATiOn : Specify the duration of the alarm output.
-
TRAnSPAREnT : Keep the alarm out for as long as the event occurs.
-
UnTiL KEy : Keep the alarm out until a mouse or remote control button is pressed.
-
5 ~ 300 SEC : Keep the alarm out for a specified time.
i
TEST : Forcibly output the alarm testing purposes.
3.
To apply the change, click <APPLy> in the bottom of the screen.
4.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
ALARM I/O CONNECTIONS
SRL SRE SRP
Alarm Output: 1 Alarm Output: 2 Alarm Output: 8
Alarm input: 1 Alarm input: 4 Alarm input: 16
Relay: 8
ON/OFF Schedule
you can activate or turn off the alarm output as scheduled.
1.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control
or use the mouse to select a <DATE> for the schedule.
2.
Drag the mouse to resize the cell or use the on the
[
▲▼◀▶
] buttons to move to the cell, then press [EnTER].
3.
Select a desired alarm output mode.
i
On : The alarm output is always turned on.
i
OFF : The alarm output is always turned off.
i
EVEnT : Trigger the alarm output in sync with the
event.
4.
Click <COPy SCHEDULE> to copy the configured alarm
schedule to the desired day(s).
5.
When done, click <OK> to apply the settings.
6.
To apply the change, click <APPLy> in the bottom of
the screen.
7.
When done, press the [ExiT] button on the remote
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.
System Setting