Vitek VT-PTZ10, Руководство пользователя

Страница: 39 / 52

VT-PTZ10
38
When the dome camera is installed near a wall or on a corner, panning range can be
limited by user.
3.5.5 TILT LIMIT (
MENU
=> SETUP => TILT LIMIT)
Turn Tilt Limit OFF to the allow the camera to have full range of tilting ability from 0 ot
180 degree.
Turn Tilt Limit On to limit the tilting range by up to +10 degree on both ends.
During zoom-out operation the tilting range is increased slightly by additional
+10 degree.
3.5.6 CALIBRATION (
MENU
=> SETUP => CALIBRATION)
RESET ORIGIN : Calibrate the ORIGIN point.
OFFSET ORIGIN
: Adjust the small amount of position error from re-
installation.
ACTIVE OFFSET : Apply the adjustment above or not
AUTO CALIBRATION : ON
– When position error detected, recover
automatically.
OFF
– Disregard the position error.
PAN RANGE SETUP
RIGHT LIMITE : 000.0
LEFT LIMT : 007.2
ENABLE : ON / OFF
SWAP RIGHT LEFT
SAVE AND EXIT
CALIBRATION
RESET ORIGIN
ORIGIN OFFSET : 000.0 , 000.0
ACTIVE OFFSET : DISABLE/ENABLE
AUTO CALIBRATION : OFF
SAVE AND EXIT