Vitek VT-PTZ10, Руководство пользователя

Страница: 25 / 52

VT-PTZ10
24
SHORTCUT TO PROGRAMMING PRESETS.
Select direction of the camera, zoom and focus to be programmed, then press No.
(
1~64
), and then press
SHFT
,
PRST
subsequently. The current view will be stored to
the selected preset number if position is empty. If selected preset number is not empty,
―PRESET EXISTING‖ message will be displayed on the monitor and you will be
prompted to overwrite.
Example :
1
,
0
+
PGM
+
PRST
will memorize current view as preset No. 10 . In this case,
focus and Iris mode will be memorized as auto and dwell time will be set to 3 sec.
3.1.3 PATTERN (
MENU
=> FUNCTIONS => PATTERNS or Shortcut:
PTRN
)
The Pattern function memorizes and stores movement of the selected dome camera for
up to 60 seconds. Pattern can be stored in 60 seconds of total recording space. Stored
pattern is played back by pressing
No.
+
PTRN
buttons subsequently.
Follow the steps below to program the Pattern:
1. Press
MENU
key to display the main menu on the monitor.
2. Simply press the
PTRN
key.
(
or
MENU
=> FUNCTIONS =>PATTERN)
3. Select the empty Pattern number to be programmed by moving the Joystick Up
or Down. If SEC column is not 000, then the selected No. of pattern is already
recorded.
4. Press and hold down the
SHFT/PGM
key while controlling the camera direction
and zoom with the
Joystick
. The pattern movement will automatically be
recorded until releasing the
SHFT/PGM
key. This procedure can be repeated to
reprogram the pattern.
(Or twist zoom handle or hit zoom button to start PTZ control for view selection and
hit the Focus button to stop.)
PATTERN SETUP
NO. TITLE SEC
01 : xxxxxxxxxxxxxxxx 000
02 : xxxxxxxxxxxxxxxx
03 : xxxxxxxxxxxxxxxx
04 : xxxxxxxxxxxxxxxx
TOTAL : 000
SAVE AND EXIT