Vitek VT-HDOC Series, Руководство пользователя

Страница: 42 / 96

VT-HDOC Series
41

F/W VERSION: Shows the firmware version of the HYBRID-DVR.

H/W VERSION: Shows the hardware version of the HYBRID-DVR.

UI VERSION : Shows the UI version of the HYBRID-DVR

VIDEO SIGNAL TYPE: The HYBRID-DVR can be selected between PAL and NTSC via a
selector

HDD NUMBER: Shows the hard drive capacity installed.

IP ADDRESS 1(Ethernet Port): Shows either the manual IP address entered in NETWORK
setup or the IP address assigned by a DHCP server if enabled.

IP ADDRESS 2(Local Port): Shows either the manual IP address entered in NETWORK
setup or the IP address assigned by a DHCP server if enabled.

MAC address 1(Ethernet port): show mac address configured by manufacturer.

DDNS SERVERADDRESS: If DDNS is enabled, the host DDNS server is specified here.

HYBRID-DVR SERVICE PORT: port number for HYBRID-DVR network operation

WEB SERVER PORT: The port number that the HYBRID-DVR uses to support remote
connections.

FAN STATUS: Displays FAN Speed of HYBRID-DVR (RPM).
If cooling fan’s speed is lower than certain level, an alarm will occur.

TEMPERATURE: Display internal temperature of HYBRID-DVR (
℃
/
℉
).
SYSTEM NAME: A system name of up to 15 characters can be defined. It is used so that
notification emails can be identified.
F/W UPGRADE: Firmware updates may be released periodically to enhance system
performance and add extra features. The operator can upgrade the firmware using a USB
memory stick.
FACTORY DEFAULT: If settings have been changed which causes erratic behavior, the
factory default settings can be loaded.
SYSTEM DATA: System settings can be saved to a USB memory stick. The settings can
be reloaded in case of accidental factory reset or can be transferred to another HYBRID-