Vitek VT-8420 BK, Инструкция по эксплуатации

Страница: 5 / 32

5
ENGLISH
•
For children safety reasons do not leave polyethylene
bags, used as packaging, unattended.
Attention!
Do not allow children to play with polyethylene
bags or packaging film.
Danger of suffocation!
•
Do not use the unit if the power plug or the power cord
are damaged,
•
if the unit works improperly or after it was dropped.
•
Transport the unit in the original package.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center from the contact address
list given in the warranty certificate and on the website
www.vitek.ru.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Unpack the unit and remove any stickers that can pre-
vent unit operation.
•
Check the unit for damages; do not use it in case of
damages.
•
Before switching the unit on, make sure that voltage of
the mains corresponds to unit operating voltage.
USAGE
To get the best results, wash your hair with shampoo, wipe
it with a dry towel, dry with a hairdryer and comb your hair.
After that you can start styling your hair.
•
Divide the hair into locks 4-5 cm wide.
•
Insert the power plug into the mains socket.
•
Press and hold down the button (2) for 2-3 seconds, the
default heating temperature (160°С) will appear on the
display (3). After a few seconds the display (3) will show
the symbols indicating current temperature.
•
Use the buttons (9) «+»/ «-» to set the desired heating
temperature.
Note:
– You can select the heating temperature within the range
from +120°С to +210°С with the interval 5°С.
VT-8420.indd 5 01.08.2016 14:01:18