Vitek VT-8302, Инструкция по эксплуатации

Страница: 7 / 32

7
ENGLISH
•
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar.
• After removing scale, polish the iron soleplate
surface with a dry cloth.
•
Do not use abrasives to clean the iron sole-
plate and body.
• Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
• Set the temperature control knob (11) to the
position «MIN», and the continuous steam
supply knob (3) to the lower position
–
continuous steam supply is off. Remove the
power plug from the mains socket.
• Put the iron vertically and let it cool down
completely.
•
Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (10).
•
Close the lid (2).
•
You can wind the power cord around the iron
base (9).
• Store the iron vertically in a dry cool place out
of reach of children and disabled persons.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 2000-2400 W
Max power: 2400 W
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru
for receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-8302.indd 7 01.07.2019 16:25:40