6
ENGLISH
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
HAIR CRIMPING
•
Only use the unit on healthy, undyed, and not permed
hair.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Open the curling tongs by pressing the heating
plates (1) together and moving the clamp (5) right-
wards.
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the plug into the mains socket.
•
Switch the unit on by setting the power switch (4)
button to the position «I», the indicator (3) will light
up.
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
Divide combed hair into locks of equal width (about
2 cm).
•
Place a hair lock between the heating plates (1).
•
Press the hair lock between the heating plates (1)
near the hair roots and create crimps throughout
the hair length.
•
Do not slide the unit throughout the hair lock length,
just press the heating plates (1) together to make
crimps.
IMPORTANT: do not keep the heating plates on the
same area of the hair lock for more than 2 seconds.
•
After that start styling the next hair lock.
•
Cool your hair down before final styling or applying
hair spray.
•
Avoid contact of heated surfaces with your face,
neck and other parts of your body.
•
After use set the power switch (4) to the position «0»
and take the power plug out of the socket. Let the
unit cool down.
IM VT-8291.indd 6
07.09.2018 15:02:32
