Vitek VT-8234, Инструкция по эксплуатации

Страница: 5 / 36

5
ENGLISH
• The power cord may not:
–
touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
•
Check the integrity of the power cord periodically.
•
Do not use the unit if the power cord or plug is dam-
aged. If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance service
or similar qualified personnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
USING THE HAIR DRYER
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
– Before switching the unit on, make sure that your
home mains voltage corresponds to the unit operat-
ing voltage.
– Remove any advertisement stickers that can hinder
the unit operation.
– Unwind the power cord completely.
– Insert the power plug into the mains socket.
– Select the required operation mode using the switch (1):
«0» – the hairdryer is switched off;
«I» – supply of warm air at low flow speed;
«II» – supply of hot air at maximal flow speed.
Note: During the first operation some foreign smell and
a small amount of smoke from the heating element is
possible, it is normal.
IM VT-8234_70x130.indd 5 11.04.2019 14:23:12