Vitek VT-8215 JR, Инструкция по эксплуатации

Страница: 6 / 32

6
ENGLISH
– This model has a “cool” air function, use it to fix your
hairstyle. To switch “cool” air supply on press and hold
down the button (2).
– After unit operation, switch the hairdryer off by setting
the switch (1) to the position « 0 » (the hairdryer is off),
and unplug it.
Nozzle
This model includes a nozzle (3). Use the nozzle when you
need to focus the power of drying on a small area (for exam-
ple, a curl or a wave) or when you want to straighten wavy hair.
– Attach the nozzle (3) to the unit body. The nozzle (3)
allows directing a narrow air flow of high intensity at a
definite hair lock.
– Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer is switched off
during operation, set the switch (1) to the position «
0 » (“the
hairdryer is off”), unplug the hairdryer and make sure that
the inlets and outlets are unblocked. Let the hairdryer cool
down for 5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid getting of hair
into its air inlet.
CLEANING AND CARE
– The hairdryer is intended for household use only.
– Set the switch (1) to the position «
0 » (“the hairdryer is
off”), and disconnect the hairdryer from the mains.
– You may wipe the unit body with a damp cloth and then
wipe it dry.
– Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit body.
STORAGE
– Unplug the hairdryer if you are not using it.
– Let the hairdryer cool down after its usage, keep the unit
away from children in a dry cool place.
– Never wind the cord around hairdryer, as this can dam-
age the cord. Handle the power cord with care, do not
VT-8215_IM_70x130.indd 6 14.06.2016 15:55:05