Vitek VT-7129, Инструкция по эксплуатации

Страница: 5 / 20

5
ENGLISH
–
Wash all removable parts (1, 2, 7, 8) with warm
water and a neutral detergent, then rinse and
dry.
–
Do not wash the removable parts in a dish-
washer.
–
Remove the upper millstone (9) turning it
clockwise «
».
–
You can clean the inner and upper millstones
with a brush (14).
–
Install the upper millstone (9) turning it coun-
terclockwise « ».
–
Wipe the coffee grinder body (12) with a
slightly damp cloth, and then wipe it dry.
–
Use neutral detergents to remove dirt, do
not use metal brushes, abrasives or sol-
vents.
–
Do not immerse the coffee grinder, the power
cord and the plug into water or any other liq-
uids.
–
Do not wash the removable parts in a dish-
washing machine.
–
Keep the coffee grinder in a dry cool place
out of reach of children and disabled per-
sons.
DELIVERY SET
Coffee grinder assembled – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 150 W
Bean container capacity: 240 g
Ground coffee tank capacity: 140 g
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-7129.indd 5 29.06.2018 16:44:53