ENGLISH
7
Display brightness adjustment
In the current time mode, press the
«DIMMER» button (2) repeatedly.
Display auto switch off
Note: This function is not active in the
radio mode.
–
To activate the function, press and
hold the «DISPLAY AUTO OFF» button
(9) until the «
» indicator appears
on the display (6). The display will go
out in 15 seconds. Press any button for
short-time display of time.
–
To switch the function off, while in cur-
rent time mode, press and hold the
«DISPLAY AUTO OFF» button (9) until
the «
» indicator goes out.
Countdown timer
–
Press the «MEM/M+/NAP» button
(7) in current time mode, the symbol
«n90» will appear on the display, which
means countdown timer actuation in
90 minutes.
–
Set the time of timer actuation from 10
to 90 minutes with the 10 minute step
by pressing the «MEM/M+/NAP» but-
ton (7) repeatedly.
–
The unit will save the settings and will
be switched to the current time mode
in 5 seconds.
–
To view the remaining time, press the
«MEM/M+/NAP» button (7) once.
–
After the set time runs out, you will
hear a sound signal; to switch it off,
press the «
» button (1).
–
To switch the timer off, press the
«MEM/M+/NAP» button (7) repeatedly
until the «OFF» symbol appears on the
display or switch the radio on by press-
ing the «
» button (1).
RADIO MODE
Note: Electromagnetic interference can
influence operation of the unit. In this case
disconnect the unit from the power sourc-
es, and then connect again. If necessary,
move or relocate the unit.
Radio stations reception
–
Connect the unit to the mains and
press the «
» button (1).
–
Use the buttons (8) «
◄◄
» and (9) «
►►
»
for tuning to the desired radio station.
Manual tuning:
consequently press the
buttons (8) «
◄◄
» and (9) «
►►
» to select
the desired radio station with the step of 0.1
MHz in FM mode.
Auto tuning:
press and hold the button (8)
«
◄◄
» and (9) «
►►
» for more than 2 sec-
onds. The tuner will begin scanning and
automatically stops after finding the closest
strong radio station signal.
–
To switch the radio off, press the
«
» button (1).
Antenna (12)
Select the wire antenna (12) position for the
highest quality of radio signal reception.
Volume level adjustment
Use buttons (10) «
» and (11) «
» to set
the desired volume level.
Radio stations programming
You can tune to and save 10 radio stations
in FM band.
–
Tune to the station you want to pro-
gram.
–
Press and hold the «MEM/M+/NAP»
button (7) until a flashing symbol of
«Р--» appears.
–
Press the buttons (8) «
◄◄
» and (9)
«
►►
» repeatedly to select the number
of the programming cell.
–
Press the «MEM/M+/NAP» button (7)
again to save the selected settings.
–
To select one of the pre-programmed
radio stations, repeatedly press the
«MEM/M+/NAP» button (7) in radio
mode.
VT-6605.indd 7
13.05.2014 11:49:17