ENGLISH
5
–
To connect the unit to the mains, insert
the plug of the power cord (14) into
the socket.
–
Power surges or electrostatic discharge
may cause malfunction in the unit oper-
ation. In such a case unplug the unit
and remove the battery. After 5 minutes
install the battery back to its place (see
above) and switch the unit on.
Attention!
Batteries leakage can cause injuries or
unit damage. To avoid damages, follow the
recommendations specified below:
•
insert the battery following the polarity
(with the «plus» upward);
•
remove the battery if you are not plan-
ning to use the unit for a long time;
•
do not dismantle the battery, do not
subject it to high temperatures;
•
replace the battery in time.
CURRENT TIME MODE
Date and time setting
–
Insert the plug of the power cord (14)
into the mains socket.
–
Press and hold the «
» button (7), the
year digits will be flashing on the display.
–
Use the buttons (8) «
◄◄
» and (9)
«
►►
» to set the year.
–
Press the «
» button (7), the month
digits will be flashing.
–
Use the buttons (8) «
◄◄
» and (9)
«
►►
» to set the month.
–
Press the «
» button (7), the day dig-
its will be flashing.
–
Use the buttons (8) «
◄◄
» and (9)
«
►►
» to set the day.
–
Press and hold the «
» button (7),
the time format symbol will be flashing:
24 hours (24 Hr) or 12 hours (12 Hr).
–
Use the buttons (8) «
◄◄
» and (9)
«
►►
» to select the time format (12
hours or 24 hours).
–
Press the button (7), the hour digits will
be flashing on the display.
–
Use the buttons (8) «
◄◄
» and (9)
«
►►
» to set the necessary hour.
Note: To set the afternoon time in the
12 hour format («12 Hr»), press the but-
tons (8)
«
◄◄
»
and
(9)
«
►►
»
repeatedly
until the «PM» indicator appears on the
display (6).
–
Press the «
» button (7), the minute
digits will be flashing on the display.
–
Set the time in minutes using the but-
tons (8) «
◄◄
» and (9) «
►►
».
–
To save the settings, press the
«
» button (7).
Note: If the buttons (8)
«
◄◄
»
and
(9)
«
►►
»
are not pressed within 30 seconds
during the setup process, the unit will be
switched to the current time mode.
Date and time displaying
–
To view the date in the current
time mode, repeatedly press the
«Y-M-D/
» button (8).
–
To switch the automatic sequential
date and time displaying mode on,
press and hold the «Y-M-D/
» but-
ton (8) until the symbol «ON» appears
on the display. Indications of the cur-
rent time and date (year, month and
day) will supersede each other con-
secutively on the display (6).
–
To switch the sequential display-
ing mode off, press and hold the
«Y-M-D/
» button (8) until the sym-
bol «OFF» appears on the display.
Setting the clock to winter/summer
time
–
To switch the clock to summer time
(+1 Hr), press the «DST» button (2) in
current time mode and hold down it for
3 seconds.
–
Press and hold the «DST» button (2)
for 3 seconds to return to winter time
VT-6605.indd 5
13.05.2014 11:49:17