6
ENGLISH
6
Press and hold the button
▲
for 2 seconds
to enter the weather symbol selection mode.
Use the button
▼
to select the most suitable
weather symbol. Press the button
▲
once
again to confirm your selection.
The indication precision is approximately
70%. The weather station forecasts pos-
sible weather, that is why the symbols
may not comply with current weather. The
weather forecast: «sunny» for the upcom-
ing night means a clear sky.
Comfort level
Temperature and humidity data is used for
evaluating of comfort level, that is represent-
ed by one of the three pictograms: wet (wet),
com (comfortable), dry (dry).
Setting the alarm time
•
Press the MODE button consequently to
display set alarm times (А1, А2). When the
alarm clock is switched off, the symbols
«0:00» will appear on the display.
•
Hold the ALARM button for 3 seconds, the
clock symbols start flashing. Use
▼
/
▲
buttons to select desired value and press
the ALARM button to confirm your setting.
•
Repeat the same procedure to set the
time of the second alarm.
•
By pressing the ALARM button repeat-
edly you can activate one or two alarms
or both of them at the same time or deac-
tivate them.
Repeating alarm signal
The alarm signal can be switched off for 5
minutes by pressing the SNOOZE button.
If you do not switch the alarm clock off within
2 minutes, it will be automatically switched to
the signal repeat mode.
Specifications
Temperature measuring
Remote sensor (used without outdoor wired
sensor connection)
From -9,9°C to 50°C
From 14°F to 122°F
Remote sensor
(with outdoor wire sensor connected)
From -40°C to 70°C
From -67°F to 158°F
Temperature measuring precision
0,1°С/0,1°F
Relative humidity measuring
Main unit
20%-95%
Remote sensor
20%-95%
Relative humidity measuring precision
1%
Data transfer rate
868 mHz
Number of sensors connected
1
Transmission range
Up to 50 meters
Power supply
Main unit
4,5 V DC power adapter
3 «AАА» batteries, 1,5 V
Remote sensor
2 «
ААА» batteries
VT-6407_IM_18x14.indd 6
15.05.2013 14:19:36
