Vitek VT-5280 W, Инструкция по эксплуатации, Страница: 3 / 20

3
ENGLISH
MANICURE LAMP VT-5280 W
The manicure lamp is intended for drying regular nail polish, all
types of gel nail polish and shellac.
DESCRIPTION
1.
Body
2.
Battery compartment lid
3. UV LEDs
4.
Chamber for fingers
SAFETY MEASURES
Before using the manicure lamp, read this instruction carefully.
Keep this instruction during the whole operation period of the set.
•
Use this unit only for the intended purposes, as described
in this manual.
•
Do not store the lamp near the water tanks. Do not use or
keep the unit in places where it can fall into the water.
•
Do not use the unit, if there are wounds or rash on the skin
of your hands.
•
During the unit operation do not look at the UV LEDs.
•
For children safety reasons do not leave polyethylene bags,
used as packaging, unattended.
Attention! Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
•
Keep the unit out of reach of children.
•
Never allow children to use the unit as a toy.
•
The unit is not intended for usage by physically or mentally
disabled persons (including children) or by persons lacking
experience or knowledge if they are not under supervision of
a person who is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it was
dropped, unplug the unit and apply to any authorized service
center at the contact addresses given in the warranty certifi-
cate and on the website www.vitek.ru.
•
Transport the unit in the original package.
•
For environment protection do not discard the unit with usual
household waste after its service life expiration; apply to a
specialized center for further recycling.
•
Keep the unit in a dry cool place out of reach of children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
BEFORE USING THE UNIT
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature before
switching on.
IM VT-5280_70x130.indd 3 19.06.2017 12:30:44