Vitek VT-5009 SR, Инструкция по эксплуатации

Страница: 11 / 48

PROGRAM Function:
PROGRAM position is selected on screen, press the [V+] or [V] button to set up or down the program channel and select
your desired program from 0 to 99.
STEREO Function:
STEREO position is selected on screen, press [V+] or [V] button to set stereo ON or OFF mode. Normally the stereo function
is set to "ON" state.
(2) SYSEM of FM Radio Mode Operation:
Refer to section (4) TV SYSTEM operation and detail about SWAP and COPY function. C. SYS., S. SYS., WEAK SIGNAL func
tions will disappear on the menu of screen.
(3) FUNCTION of FM Radio Mode Operation:
Refer to section (3) TV FUNCTION system operation about the detail.
(4) Clock Function Operation:
Refer to section (6) CLOCK system operation about the detail.
(E) AV Mode Operation
•
When you want to watch other source device with AVIN and connect the source signal to the unit and yellow colour jack
connect to video signal, Red colour jack connect to Audio Right channel, White colour jack connect to audio left channel.
• Press the [TV/AV/FM] button to select AV channel on screen. Then you can watch the video picture
NOTE: In AV mode. The PRESERT, S. SYS., SWAP, COPY, WEAK SIGNAL setting menu will disappear on the screen.
(F) Remote Control
•
In the remote handset, press the MUTE button to temporary silences audio output, and press button again back to normal
state.
• Press the button to alternate between previous and current program.
• Press the / button to set direct key digit number 1, 2 or 3.
• Press the digit button 0 9 it will tune your desired program directly.
(G) Listen Audio with The Headphone
Plug the earphone into the earphone socket and it will cut off speaker signal automatically.
(H) Charge Battery and Battery Operation Function:
•
Insert the rechargeable batteries into battery case (UM3, LR6, size= "AA" x 10 pcs) and install the case to main unit, Then
plug AC/DC adaptor power or Car power source into the main unit.
• Switch the battery mode to "Charge" position then it will charge up battery automatically and charge indicator light will be
on.
• If used the battery power set the battery mode switch at "Power" position and release the plug of AC/DC adaptor or Car
power.
Warning: Do not use NONRECHARGEABLE Batteries to charge. The batteries will explode and damage the unit.
Caution: DO NOT charge continuously for over 24 hours, as it will deteriorate the performance of the rechargeable
batteries.
NOTE: If rechargeable batteries are being charged for the first time, it will take approximately 15 hours to be full charged.
If the operating time is reduced drastically even when the rechargeable batteries are properly recharged replace a
new set of rechargeable batteries.
ENGLISH
11
5009.qxd 29.06.05 14:56 Page 11