Vitek VT-3525 W, Инструкция по эксплуатации

Страница: 6 / 44

ENGLISH
6
Alarm setup ( and )
– To view the settings of the first
alarm in the current time mode
press the button (5)
.
– In the mode of viewing the alarm
settings, press and hold the button
(5)
again. The hour digits will
start flashing on the display.
– Use the buttons (2) « » and (6) «
», to select the necessary hour.
– Press the button (5) . The min-
ute digits will start flashing on the
display.
– Use the buttons (2) « » and (6) «
» to select the necessary minutes.
– Press the button (5) . Flashing
symbols of alarm signal repeating
mode will appear on the display.
Use the buttons (2) « » and (6) «
» to select the necessary mode.
– 1-1 without repeat,
– 1-5 alarm signal repeating from
Monday to Friday,
– 1-7 alarm signal repeating seven
days a week,
– 6-7 alarm signal repeating on
Saturday and Sunday.
– Press the button (5) . If you
set the alarm signal without
repeat (1-1), the alarm day dig-
its will appear on the display. Set
the alarm day (1 - Monday, 2 -
Tuesday etc.) using the buttons (2)
« » and (6) « ».
– Press the button (5) . The alarm
signal symbols will start flashing
on the display. Use the buttons (2)
« » and (6) « » to select the nec-
essary alarm signal: sound signal
(symbol «bu») or radio (tuned sta-
tion frequency appears)
– If you selected radio as alarm sig-
nal, press the button (5) , the
volume level symbols will start
flashing on the display (from 1 to
15). Set the desired volume level
using the buttons (2) « » and (6)
« ».
Note : If you want to select the radio as
an alarm signal, preliminary tune the
required radio station (see “Radio sta-
tions reception”).
– Press the button (5) . The night
lamp (8) brightness level symbols
will start flashing on the display.
Select the brightness level (from
1 to 10, OFF - the night lamp is
off) using the buttons (2) « » and
(6) « ».
Note : Night lamp (8) lights up 5 min-
utes before the alarm.
– To finish the setting of the first
alarm, press the button (5) .
– Repeat the above steps for the
second alarm (3) .
Note:
•
If the buttons (2) « » and (6) «
» are not pressed within 30 sec-
onds, the unit will be switched to
the current time mode.
Switching the alarm on/off
– To switch the alarm (alarms) on in
the current time mode press and
hold the button (5)
and/or the
button (3) until the indicators
(25) «AL 1» and/or (24) «AL 2»
appear on the display respectively.
– To switch the alarm (alarms) off
in the current time mode press
and hold the corresponding but-
VT-3525_105 x148.indd 6 05.02.2013 11:35:00