Vitek VT-3457 R, Инструкция по эксплуатации

Страница: 8 / 50

ENGLISH
7
Playback of MP3 discs (CD-R/RW support-
ed)
Starting
Note:
Always close the discs slot lid to prevent it from
dust. Always extract the disc from the slot if it is
not being played back.
Do not open the disc slot while the disc is being
played back.
If while playing back the tracks are skipped, low-
er the volume level.
When you stop listening to CD discs, set the op-
erating modes switch to the OFF position.
1. Open the disc slot lid. Inset the disc and close
the lid. Make sure that the disc is inserted
properly – with the label upwards.
Select the playback mode, by setting the op-
erating modes switch to the CD position.
Note: Make sure that the disc slot lid is closed
and locked properly.
2. When the lid is closed and the disc is inside,
total number of tracks will appear on the LCD-
display.
If there is no disc in the disc slot, “ ” will ap-
pear on the LCD-display.
If the lid of the disc slot is not closed, “_ _ _” will
appear on the LCD-display.
Play/Pause
1. To playback press the PLAY/PAUSE button,
the play back of the first track will start. The
number of the track, the “
” and the “MP3”
symbols will be displayed.
2. Selection of the desired track of the MP3
Disc.
Depending on the method of creation (burn-
ing) of your MP3 disc, tracks can be divided
into folders (albums).
а. If a MP3 disc is loaded without division into
folders (albums), total number of tracks will
be displayed. In this case while pressing the
FOLDER button the number of the folder,
which is displayed, will always be 001.
To select the desired track press the SKIP/
SEARCH buttons. The number of the track will
be displayed.
b. If your МР3 disc contains several folders, first
it is necessary to select the number of the
folder where there is a desired track, using
the FOLDER button, then select the desired
track, by pressing the SKIP/SEARCH but-
tons.
For instance : You need to select track 3 in
folder 4
• Use the FOLDER button to select folder 4
• Use the SKIP/SEARCH buttons to select track
3.
• To playback press the PLAY/PAUSE button.
3. To pause the playback, press this button once
again, the “ ” symbol will be flashing.
4. To resume playback press the PLAY/PAUSE
button once again. Playback will start from
the point of pausing.
5. To stop playback press the STOP button, no
matter whether the track was in the playback
mode or in the pause mode. Total number of
tracks will appear on the LCD-display.
6. To switch off the unit, set the operating mode
switch to the “OFF” position.
Repeat modes
In the playback mode to repeat one track press
the MODE button once, the “REP” symbol will
appear on the LCD-display. The selected track
will be played back without interruption.
3457IM.indd 7 3457IM.indd 7 13.11.2009 9:59:23 13.11.2009 9:59:23