Vitek VT-3421 ST, Инструкция по эксплуатации, Страница: 6 / 20

6
ENGLISH
–
After using the unit, wait until the chopping
knife (7) fully stops.
–
Unplug the unit from the mains.
–
Disconnect the motor unit (2) from the geared
lid (8) feeding chute.
–
Remove the geared lid (8), turning it counter-
clockwise.
–
Carefully remove the chopping knife (7) taking
it by the plastic end.
–
Take the chopped products out of the chop-
per bowl (6).
Attention!
Strictly follow the described sequence of opera-
tions.
CLEANING
Attention! The blades of the chopping knife
(7) are very sharp and may be dangerous.
Handle the chopping knife (7) very carefully!
1.
Unplug the unit before cleaning.
2.
Remove the attachments. Use a slightly damp
cloth to clean the motor unit (2) and the
reduction gears (8, 9), then wipe them dry.
3.
After processing of salty and sour products it
is necessary to rinse the chopping knife (7)
with water immediately.
4.
While possessing products with strong dyeing
properties (for instance carrot or beet-root)
the bowls or attachments can get colored,
wipe the attachments or bowls with a cloth
dampened in vegetable oil.
5.
Wash the attachments that will contact prod-
ucts with warm water and a neutral detergent
and dry them thoroughly after use.
Note: Do not immerse the motor unit (2) and the
gears (7, 8) into any liquids; do not wash them
under water jet or in a dishwashing machine.
STORAGE
• Clean and dry the unit thoroughly before tak-
ing it away for long storage.
•
Do not wind the power cord around the motor
unit.
• Keep the blender set away from children in a
dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk attachment – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1pc.
Measuring cup – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Max. power 800 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-3421.indd 6 15.09.2016 14:51:52