Vitek VT-3418 W, Инструкция по эксплуатации, Страница: 6 / 32

6
ENGLISH
•
To switch the unit on, press and hold down the but-
ton «I» (4).
•
If you press and hold down the button «II» (3), the unit
will operate at maximum rotation speed. Use this opera-
tion mode for combined processing of liquid and hard
products.
Notes:
– Products should be put into the bowl before the unit is
switched on. The amount of processed food should not
exceed 2/3 of the capacity of the bowl in which the food
is processed.
– Before starting to chop/mix, we recommend to peel
fruit, remove inedible parts, such as stones, and cut fruit
into cubes approximately 2x2 cm in size.
•
After you finish using the unit, take the power plug out
of the socket and remove the blender attachment (1),
turning it clockwise.
Attention!
•
Do not remove the blender attachment (1) during
operation.
•
To avoid damaging the blades, do not process too
hard products such as cereals, rice, spices, coffee
beans, cheese, frozen food.
•
If the foodstuffs are hard to chop with the blender
attachment, add some water, liquor or juice if pos-
sible.
CLEANING
Attention! The blades of the blender attachment (1)
are very sharp and may be dangerous. Handle them
very carefully!
• Unplug the unit before cleaning.
•
Remove the attachment.
•
Use a slightly damp cloth to clean the motor unit (2) and
then wipe it dry.
•
After processing salty or sour products, rinse the blend-
er attachment (1) with water immediately.
•
While processing products with strong dyeing proper-
ties (for instance, carrot or beetroot), the attachments
or bowls can get colored, wipe the attachments or bowls
with a cloth dampened in vegetable oil and then wash
them with neutral detergent and rinse.
VT-3418_70x130.indd 6 06.05.2015 16:39:00