7
ENGLISH
USING THE TRIMMER
–
For cordless use of the unit, charge the bat-
tery fully following the recommendations
above.
–
For the corded unit operation, insert the
power adapter (
14
) cord into the trimmer
socket (
1
) on the bottom part of the unit
body and connect the power adapter (
14
)
plug to the mains.
–
Install the required blade block
(5
,
6
or
7
).
–
Before cutting hair, switch the trimmer on
by setting the power switch (
3
) to the posi-
tion «
ON
».
–
Make sure that the unit operates normally
and the blades move smoothly. If there is
excess oil on the blades, remove it with a
dry cloth.
–
During operation with the trimmer connect-
ed to the power adapter, always check the
power cord condition, do not allow its mul-
tiple twisting, periodically turn the trimmer
off and straighten the power cord.
–
If you need to install one of the attachments
(
8, 9, 10, 11, 12
), switch the unit off by set-
ting the switch (
3
) to the position «
OFF
»,
then install the attachment.
–
Switch the unit on by setting the power
switch (3) to the position «
ON
».
–
After you finish using the unit, set the power
switch (
3
) to the position «
OFF
».
Notes:
–
Always switch the trimmer off during the
breaks in operation.
–
Before changing the attachment switch the
trimmer off, and if the trimmer is cord-
operated, remove the power adapter from
the mains.
Hair cutting
Use the blade blocks (
5, 6
) with corresponding
attachments (
8, 9, 10, 11, 12
) for hair cutting.
You can use the blade block for short hair
(the detail trimmer) (
7
) for cutting designs on
short hair.
•
Hair should be clean while cutting.
•
You can also cut wet hair.
•
Install the required blade block (
5
,
6
or
7
).
•
Install the corresponding attachment (
8
or
9, 10, 11, 12
) on the blade block (
5
or
6
).
•
Seat a person so that his/her head is
approximately at your eye level, cover the
person’s shoulders with a towel and set hair
with the comb.
•
Switch the trimmer on by setting the power
switch (
3
) to the “
ON
” position.
Reminder
–
Always cut off a small amount of hair at a
time – if necessary you can always return
to the cut area again for additional cutting.
–
The best haircutting results are reached on
dry hair, not wet.
–
Comb the hair to reveal uneven locks.
–
It is better to leave longer hair after cutting
for the first time.
–
After learning the unit better, you will be able
to arrange your hair in any style you need.
–
Before changing the attachment switch
the trimmer off, and if the trimmer is
cord-operated, remove the power
adapter from the mains.
Step one
Install the corresponding attachment on the
selected blade block to leave the remaining
hair length 3 or 6 mm. Switch the trimmer on
by setting the power switch (
3
) to the “
ON
”
position. Hold the unit with the blades pointed
upwards. Start cutting from the beginning of the
hair growth. Slowly move the trimmer upwards.
This way cut the head back area at neck bottom
and near the ears.
Step two
Switch the trimmer off by setting the power
switch (
3
) to the “
OFF
” position. Depending
on the blade block being used install the cor-
responding attachment in such a manner as to
leave the remaining hair length 8 or 9 mm (12
mm), switch the trimmer on and continue cut-
ting hair near the top of the head.
Step 3 – cutting in the temples area
Switch the trimmer off, install the correspond-
ing attachment to leave the remaining hair
IM VT-2547.indd 7
29.08.2016 10:48:11
