6
ENGLISH
– Switch the unit on by setting the power switch (6) to the
position «I», the light indicator (7) will light up.
– Wait for some time required for the operation surface (2)
heating.
– Take a hair lock with the free hand.
– Place the end of the hair lock on the operating sur-
face (2) and wind the hair lock around the operating
surface (2).
– Wait for some time and remove the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– when using the unit for the first time, a foreign smell can
appear. It is normal.
– do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (4).
– during breaks in operation, place the unit on a flat heat-
resistant surface or use the hanging loop (5).
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After the unit operation, switch the unit off by setting the
power switch (6) to the “0” position and unplug it.
– Place the unit on a flat heat-resistant surface or use the
hanging loop (5) and let the unit cool down completely.
CLEANING AND CARE
– Before cleaning unplug the unit and let it cool down
completely.
– Do not immerse the unit, power cord and power plug of
the unit into water or any other liquids.
– Do not use detergents, abrasives or any solvents to
clean the unit.
– Clean the unit body with a soft, slightly damp cloth and
then wipe it dry.
STORAGE
– Let the unit cool down completely and clean it before
taking away for storage.
– Never wind the cord around the unit body, as this can
damage the cord.
IM VT-2522.indd 6
11/18/20 6:24 PM
