Vitek VT-2284, Инструкция по эксплуатации

Страница: 3 / 36

3
ENGLISH
HAIR STRAIGHTENER VT-2284
The unit is intended for hair straightening.
DESCRIPTION
1. Heating plates
2. Illuminated On/Off button
3. Handle
4. Heating plates lock
5. Hanging loop
ATTENTION!
Do not use the unit near water in the bathrooms, showers,
swimming pools etc.
• When using the unit in a bathroom, unplug it right after
usage by taking the power plug out of the mains socket,
as closeness of water is dangerous even if the unit is
switched off.
• For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact
a specialist for installation.
•
Place the hair straightener on a flat steady heat-resistant
surface. Make sure that the heating plates and outer
operating surfaces do not touch fusible and inflammable
objects (plastic, polyethylene, synthetic materials etc.).
SAFETY MEASURES
Before using the electrical unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified in
this manual. Mishandling of the unit may lead to its breakage
and cause harm to the user or damage to his/her property.
•
Before switching the unit on, make sure that voltage of
the mains corresponds to unit operating voltage.
•
Never leave the operating unit unattended.
• Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Do not use the device near heat sources.
• Hair spray should be applied only after hair straighten-
ing is finished.
• Always unplug the unit immediately after usage and
before cleaning.
• When unplugging the unit, pull the plug but not cord.