Vitek VT-2216, Инструкция по эксплуатации, Страница: 6 / 44

6
ENGLISH
Attention: Always switch the unit off and unplug it before
installing and changing attachments.
Felt cone (8)
The felt cone (8) polishes the nail surface and adds gloss
to your nails.
Large cone attachment (9)
The attachment (9) is used for treating nail surface and
rough skin. Gently move the attachment (9) along the
treated nail or skin surface.
Pointed attachment (10)
Intended for removing dead skin and cleaning ingrown nails.
Small cone attachment (11)
This attachment is used for both fingernails and toenails
treatment.
Note: When operating the attachments (10, 11) do not
touch the nail surface.
Discs (12, 13)
Use the discs (12, 13) to shape your nails. Use the fine
disc (12) for treating soft and thin nails. For thicker nails
use the coarse disc (13) first and finish treating with the
fine disc (12). We recommend starting nail treatment at the
minimal disc (12, 13) rotation speed. If necessary, you can
increase the disc (12, 13) rotation speed.
Rough skin removing attachment (14)
Use the attachment (14) for treating rough skin, for instance,
on the heels and for removing callosities from hands. Slightly
press the attachment (14) to your skin and move the attach-
ment (14) in different directions to gradually remove the
layer of dead skin.
TIPS
Follow these recommendations to keep your nails healthy
and achieve good results:
•
Do not expose your hands to extreme cold. Always wear
gloves when it’s cold.
•
Avoid getting of irritant chemicals on your nails.
•
Do not use alkaline soap when washing your hands.
•
Good nail hydration is a key to healthy and strong nails,
resistant to nail peeling and fragility.
VT-2216_IM_70x130.indd 6 29.12.2017 14:22:33