Vitek VT-2216, Инструкция по эксплуатации, Страница: 5 / 44

5
ENGLISH
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least 3 hours at room temperature before
switching on.
– Unpack the unit and remove all packaging materials that
can prevent unit operation.
– Before plugging the unit in make sure that the adapter
operating voltage corresponds to the voltage of your
mains.
– Wipe the motor unit body (4) with a soft cloth.
– Rub the attachments (8-14) with rubbing alcohol to dis-
infect them.
USAGE
– Insert one of the attachments (8-14) in the motor
unit (4), if the attachment installation is hindered, turn
the attachment clockwise/counterclockwise, after the
sockets are matched press the attachment (8-14) down-
wards to fix it.
– Insert the power adapter (15) cord plug into the sock-
et (1).
– Plug the power adapter (15) into the mains socket.
– Switch the unit on by setting the attachment rotation
direction switch (2) to the required position, the light
indicator on the attachment rotation speed scale (3) and
the illumination (7) will light up.
– In the switch (2) upper position the attachment rotates
clockwise.
– In the switch (2) lower position the attachment rotates
counterclockwise.
– Control the attachment rotation speed by pressing the
buttons (5 and 6), the corresponding light indicator on
the attachment rotation speed scale (3) will light up.
Note: we recommend using low attachment rotation speed
for nails treatment and higher rotation speed for rough skin
treatment.
– After you finish using the unit, switch it off by setting
the switch (2) to the middle position. Unplug the power
adapter from the mains socket and remove the power
adapter cord plug (15) from the connection socket (1).
ATTACHMENTS (8-14)
Options of using the manicure/pedicure attachments.
VT-2216_IM_70x130.indd 5 29.12.2017 14:22:33