5
ENGLISH
USAGE
–
Insert one of the attachments (8-14) into the motor unit (4).
–
Insert the power adapter (15) cord plug into the socket (1).
–
Plug the power adapter (15) into the mains socket.
–
Switch the unit on by setting the attachment rotation direc-
tion switch (2) to the left or right position, the indicator (3)
and the illumination (7) will light up.
–
When the switch (2) is set to the right, the attachment
rotates clockwise, the indicator (3) glows green.
–
When the switch (2) is set to the left, the attachment rotates
counterclockwise, the indicator (3) glows red.
–
Control the attachment rotation speed by pressing the but-
tons (5 and 6).
Note: we recommend using low attachment rotation speed
for nails treatment and higher rotation speed for rough skin
treatment.
–
After you finish using the unit, switch it off by setting the
switch (2) to the middle position. Unplug the power adapter
from the mains socket and remove the adapter cord plug
from the connection socket (1).
ATTACHMENTS (8-14)
Options of using the manicure/pedicure attachments.
Attention:
Always switch the unit off and unplug it before
installing and changing attachments.
Felt cone (8)
The felt cone (8) polishes the nail surface and adds gloss to
your nails.
Large cone attachment (9)
The attachment (9) is used for treating nail surface and rough
skin. Gently move the attachment (9) along the treated nail or
skin surface.
Pointed attachment (10)
Intended for removing dead skin and cleaning ingrown nails.
Small cone attachment (11)
This attachment is used for both fingernails and toenails treat-
ment.
Note: When operating the attachments (10, 11) do not touch
the nail surface.
Discs (12, 13)
Use the discs (12, 13) to shape your nails. Use the fine disc (12)
for treating soft and thin nails. For thicker nails use the coarse
VT-2215_IM_70x130.indd 5
14.11.2017 15:58:41
