6
ENGLISH
–
successive making of coffee should be per-
formed with 2-3 min intervals.
–
remove the cup with ready drink from the grid
(2 or 4).
–
After the coffee maker operation is finished,
press the button (17) «
» to switch the cof-
fee maker off.
–
Wait until the coffee maker cools down,
remove the filter holder (3) and wash the fil-
ter (27).
ESPRESSO PORTION SETTING
–
Press and hold one of the buttons (18 or 25),
the coffee maker will be switched on in the
coffee making mode. Continue to press and
hold the button (18 or 25), you will hear a
sound signal. After the required amount of
ready coffee is poured into the cup, release
the button (18 or 25), you will hear a sound
signal. When you use the coffee maker next
time, it will make the preset amount of coffee.
Note: - the maximal amount of preset coffee
cannot exceed the default amount of ready drink
(see the table above) by more than twice.
–
To switch the unit back to default settings
switch the coffee maker off by pressing the
button «
», simultaneously press and hold
the buttons (18 and 25) and press the on/
off button «
», you will hear sound signals
and the coffee maker will be switched back to
default settings.
–
Switch the coffee maker on with the button
«
», all the operation mode indicators will be
flashing except the indicator (23).
–
Place a cup on the grid (2), press one of the
buttons (18 or 25), the coffee maker will be
switched on to prepare for operation with
default settings, and a test amount of water
will be poured into the cup.
–
After that all the control buttons indicators will
light up and flash. When the coffee maker is
ready for operation, you will hear sound sig-
nals and the light indicators of the control
buttons on the control panel (8) will glow con-
stantly.
MAKING CAPPUCCINO
Attention! When making cappuccino be care-
ful to avoid burns by outgoing hot steam.
–
Make sure that the removable tray (1) and the
tray grid (2) are installed to their places.
–
Open the lid (7), lift the handle and remove the
water tank by the handle (pic. 1).
–
Fill the tank with cold water not exceeding
the maximal level mark, place the tank back
to its place, lower the handle and close the
lid (7).
–
Press the cappuccinator release button (10)
and remove the cappuccinator (9).
–
Press the milk container release button (12)
and remove the milk container (14) (pic. 2).
–
Fill the container (14) with milk, do not exceed
the maximal level mark.
–
Match the ledges on the cappuccinator (9)
with the grooves on the milk container (14),
install the container (14) on the cappuccina-
tor (9) until the release button (12) goes off.
–
Install the cappuccinator (9) back to its place
until the release button (10) goes off.
–
Insert one of the coffee filters (27) into the
holder (3).
–
Add the required amount of ground coffee
into the filter (27) with a measuring spoon
(26) and slightly tamp the coffee in the fil-
ter (27) with the back side of the measuring
spoon (26).
–
Install the filter holder (3) into the installation
place (5) and turn it to the right until bump-
ing (pic. 3).
–
Place a cup of suitable height and capacity on
the tray grid (2) (see the table above).
–
Turn the bar (15) to direct the cappuccinator
pipe (16) to the cup (pic. 4).
–
Turn the frothed milk supply (intensity) control
knob (11) to the right (in this position it pro-
duces more frothed milk).
–
Insert the power plug into the mains socket.
–
Switch the coffee maker on pressing the on/
off button «
» (17), you will hear a sound sig-
nal, and all the light indicators will light up and
flash on the control panel (8).
–
When the coffee maker is ready for operation,
you will hear sound signals, and the light indi-
cators on the control panel (8) will glow con-
stantly.
–
Press the cappuccino button (24) «
», all
the control buttons indicators will go out and
the button (24) indicator will be flashing, after
some time the cappuccino making function
will be switched on.
Note: - if you need to stop the cappuccino mak-
ing, press the button (24) again.
–
After the cappuccino making is finished all the
control buttons indicators will light up.
–
Remove the cup with the ready drink from the
grid (2).
IM VT-1522.indd 6
07.11.2017 12:06:27
Содержание VT-1522 BK
Страница 2: ...IM VT 1522 indd 2 07 11 2017 12 06 27 ...
