8
ENGLISH
–
The medium cutting plate is universal - it suits
for processing both raw and cooked products.
–
The fine cutting plate is suited for processing
both raw and cooked meat, fish, etc.
•
Place the food tray (16) on the mouth of the meat
grinder head (17).
•
During the operation use only the pusher (15)
(pic. 10).
•
Use the bowl (5) for processed products.
Note:
–
For better meat processing, slice it in cubes or
stripes. Defrost frozen meat completely.
–
During the operation use only the pusher (15)
supplied with the unit; do not use any other
objects to push meat, do not push meat with
your hands.
•
Place the bowl (5) under the meat grinder
head (17).
•
Insert the power plug into the mains socket.
•
Switch the kitchen machine on by turning the
operation mode switch (11), set the required
operation speed from 3 to 6.
Note: - maximum continuous operation time of the
kitchen machine with the meat grinder attachment
is no more than 7 minutes. Make at least a 15-20
minute break before switching the unit on again.
•
After you finish operating, set the operation
mode switch (11) to the position «0» and unplug
the unit; only after that you can disassemble the
meat grinder attachment.
•
To disassemble the meat grinder head, unscrew
the nut (22) and take out the installed grate (21),
the crossed blade (20) and the screw (18) from
the meat grinder head body.
•
To remove the meat grinder head (17) turn it
clockwise and remove.
•
Wash the parts (15, 16, 17, 18, 19, 20, 21, 22)
with warm water and neutral detergent, rinse
them and dry.
•
Install the lid (14) back to its place.
BLENDER ATTACHMENT
USING THE BLENDER
The blender is used for chopping products, ice,
mixing various ingredients and making cocktails.
•
Remove the lid (13) pulling upwards (pic. 11).
•
Set the blender bowl (25) on the motor unit (8)
and turn it counterclockwise until bumping, the
bowl (25) handle (26) should be on the right side
of the motor unit (8) (pic. 12).
•
Remove the blender bowl lid (24).
•
Put the necessary ingredients into the bowl (25).
•
Cover the blender bowl (25) with the lid (24),
insert the measuring cup (23) into the lid (24)
opening and turn it counterclockwise until
bumping.
•
Make sure once again that the blender bowl (25)
is installed correctly and fixed.
•
Insert the power plug into the mains socket.
Note: - the kitchen machine will not be switched
on if the blender bowl (25) is installed incorrectly.
•
Switch the kitchen machine on by turning the
operation mode switch (11), set the required
operation speed from “1 to 6”.
«1» (low speed) - for mixing liquid products.
«6» (high speed) - for liquid and hard products.
•
During the operation or between the operation
cycles, you can add the required ingredients
into the bowl (25). To do this, turn the measur-
ing cup (23) clockwise and remove it, you can
use the measuring cup (23) as a bowl for add-
ing necessary liquid ingredients. After adding
the ingredients, place the measuring cup (23)
back to its place and turn it counterclockwise
until bumping.
•
After you finish operating, set the operation
mode switch (11) to the position «0» and unplug
the unit; only after that you can remove the
blender bowl (25).
•
Remove the blender bowl (25) from the motor
unit (8) by turning it clockwise.
•
Remove the lid (24) from the bowl (25) and take
the processed products out of the bowl (25).
•
After the operation is finished, wash the blender
bowl (25).
Note: - if food processing is hard, add some liq-
uid (water, liquor, juice) into the blender bowl (25).
•
Before starting to chop/mix, we recommend to
peel fruit, remove inedible parts, such as stones,
and cut fruit into 2х2 cm cubes.
ATTENTION! Continuous operation time of the
blender should not exceed 1 minute, and the break
between operations should be 5-10 minutes.
•
After removing the blender bowl (25) install the
lid (13) back to its place, if the lid (13) is not
installed, the kitchen machine will not switch on.
OVERHEATING PROTECTION
The overheating protection system will switch the
kitchen machine off if the electric motor operating
temperature is too high. If during the operation the
kitchen machine switches off, set the operation mode
switch (11) to the position «
0
» and unplug the unit.
Let the kitchen machine cool down for 30-40 min-
utes and switch it on again.
Do not exceed specified operation time and do not
overload the kitchen machine with products during
the operation.
IM VT-1446.indd 8
9/14/20 7:43 PM
