Vitek VT-1418 ST, Инструкция по эксплуатации

Страница: 5 / 24

5
ENGLISH
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film.
Danger of suffocation!
• Periodically check the power cord and the
plug isolation for damages.
•
Do not use the unit if the power cord or plug is
damaged, if the unit works improperly or after
it was dropped.
• Do not attempt to repair the unit. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center at the contact addresses
given in the warranty certificate and on the
website www.vitek.ru.
• To avoid damages, transport the unit in origi-
nal package only.
•
Keep the unit in a dry cool place out of reach
of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature, keep it for at least three hours
at room temperature before switching on.
–
Unpack the unit and remove any stickers that
can prevent unit operation.
–
Check the unit for damages; do not use it in
case of damages.
–
Make sure that the operating voltage of the
unit corresponds to the voltage of your mains.
–
Wash the attachments (5, 6), the scraper
blade (8), the spatula (13) and the mixer
bowl (7) with warm water and neutral deter-
gent, rinse them and dry.
–
Wipe the mixer body (4) and the holding base
(12) with a soft slightly damp cloth and then
wipe it dry.
Note: To remove the bowl (7) from the holding
base (12) slightly turn it counterclockwise and
pull upwards.
ATTACHMENTS
Beating/mixing attachments (beaters) (5)
Use the beaters (5) for beating cream and egg
white, making biscuit dough, puddings, cock-
tails, whipped cream, mayonnaise, puree and
sauces.
Dough hooks (6)
Use for kneading «heavy» dough and mixing
minced meat.
Note:
•
Do not use the beater (5) and the dough
hook (6) at the same time.
BUTTONS DESCRIPTION
–
The attachment release button « EJECT » (1) is
used for removing the attachments (5) or (6).
–
Use the operation mode switch (2) to select
the desired attachment rotation speed
«
1, 2, 3, 4, 5 ».
–
The button « TURBO » (3) is used for switching
the maximal speed on.
–
The folding support release button
«
RELEASE » (10) allows to unlock the folding
support (9) to change its position.
–
The mixer release button (11) allows to detach
the mixer (4) from the folding support (9) of
the holding base (12).
USING THE UNIT
Using the mixer (4).
You can use the mixer (4) as a separate unit
not installing it on the holding base (12).
For
quick and quality making of small portions
of products (when whipping or mixing) use
the stand mixer in the handheld mode, i.e.
detach the mixer from the holding base (12).
• Make sure that the power cord plug is not
inserted into the mains socket, and the opera-
tion mode switch (2) is set to the position
«0» .
•
Hold the mixer (4), then press and hold down
the release button (11) to remove the mixer
from the support (9) in the upward direction.
•
Insert the beaters (5) or the dough hooks (6)
into corresponding mixer (4) sockets until
clicking. Both attachments should be fixed
properly in the mixer openings (pic. 1, 2).
•
Put the necessary ingredients into a suitable
container or the bowl (7).
• Insert the power plug into the mains socket.
• Switch the mixer on with the operation mode
switch (2) and select the desired attachment
rotation speed «
1, 2, 3, 4, 5 ».
IM VT-1418.indd 5 23.12.2016 17:29:33