6
ENGLISH
– If the blades (1) have been removed for cleaning or
replacement, install them back, adjust and tighten
the fastening screws (pic. 1).
Blade shifter (2) (pic. 2)
– When you cut hair without using attachments (5,
6, 7, 8), you can shift the blade to adjust the cut-
ting length.
– In the upper shifter (2) position haircut will be the
shortest.
– In the lower shifter (2) position, the cutting length is
approximately the same as when using 3 mm attach-
ment comb (5).
– By changing the position of the shifter (2) while
cutting hair, you can select the necessary cut-
ting length.
– If hair is jammed in the blades (1) while cutting,
move the shifter (2) from the upper position to the
lower position or vice versa several times, this will
help to release the jammed hair without removing
the blades (1).
– When the hair clipper is switched on, move the shifter
(2) several times from the upper position to the lower
position or vice versa, this way you can remove the
cut-off hair from the blades (1).
– If the hair clipper pulls hair while cutting, it means
that the blades (1) became blunt, replace them with
new ones.
Lubricating oil
– Before the first use check whether the blades (1) are
lubricated, and, if necessary, lubricate them with the
oil (11) supplied with the unit. Keep the blades (1)
clean and lubricated.
– Do not use vegetable oil or oil with solvents. Solvents
are subjected to evaporation, and the remaining thick
oil can slow down the upper blade (1) moving speed.
HAIR STYLING INSTRUCTIONS
Before every use of the hair clipper always clean the
blades (1) off hair, dust or any foreign inclusion, lubricate
the blades (1) and check their adjustment.
