background image

7

 

 

 

 

 

 

              ENGLISH         

(3) is pressed, steam will be vigorously re-
leased from the openings in the iron sole 
(pic.4).

Note: In order to avoid leakage of water 
from steam openings, press the addi-
tional steam supply button (3) with 5-6 
sec. interval.

VERTICAL STEAMING

Vertical steaming function can be used 
only when the high temperature mode is 
used (set the temperature regulator (8) to 
«

•••

»).

•  

Hold the iron vertically at the distance

10-

20 cm from the clothes  

press the addi-

tional steam release button (3), steam will 
be released from the sole (1) (pic. 5).

Important information

•  Vertical steaming is not recommended 

for synthetic fabrics. 

•  To avoid melting the fabric, do not touch 

the iron sole to the item while steaming. 

•  Never steam iron clothing on a person as 

the steam temperature is very high and it 
can cause burns. Use a coat-hanger or a 
stand.

CARE AND CLEANING

•  Before cleaning the iron, make sure that it 

is turned off and has cooled completely. 

•  Wipe the iron's outer surface with a damp 

cloth and then wipe dry. 

•  Sediment on the iron sole can be removed 

with a cloth soaked in vinegar-water solu-
tion. 

•  After removing sediment, polish the sole 

with a dry cloth. 

•  Do not use abrasive substances to clean 

the sole and body of the iron. 

•  Avoid touching the iron sole with sharp 

metal objects

.

STORAGE

•  Turn the temperature regulator (8) anti-

clockwise till MIN position, set the steam 

release regulator (6) to the left position - 
steam supply OFF position. 

•  Remove the power plug from the outlet. 

•  Open the water tank lid (4), turn over the 

iron and d

rain any remaining water from 

the water tank 

(pic. 6).

•  Close the lid (2).

•  Set the iron vertically and allow it to cool 

completely. 

•  Store the iron vertically. 

Delivery set

1.  Iron – 1 pc.
2.  Water tank – 1pc.
3.  Travel pouch – 1pc. 
4.  Instruction manual – 1 pc.

TECHNICAL CHARACTERISTICS

Power requirements: 
110-120/220-240 V,

 ~ 50/60 Hz

Power consumption: 840-1000 W

Specifications subject to change without 
prior notice.

MINIMUM SERVICE LIFE - 3 YEARS

GUARANTEE

 

Details regarding guarantee conditions can 
be obtained from the dealer from whom the 
appliance was purchased. The bill of sale or 
receipt must be produced when making any 
claim under the terms of this guarantee.

This product conforms to the 
EMC-Requirements as laid down 
by the Council Directive 89/336/
EEC and to the Law Voltage 
Regulation (73/23 EEC)

1254.indd   7

1254.indd   7

29.01.2009   14:26:20

29.01.2009   14:26:20

Содержание VT-1254

















































Отзывы: