Vitek VT-1254, Инструкция по эксплуатации

Страница: 6 / 48

6
ENGLISH
SETTING THE IRONING TEMPERATURE
• If the handle (5) is at a low position, raise
it, it will fix.
• Unwind the power cord and insert the
plug into the socket.
• Set the temperature regulator (8) to the
required ironing temperature
: “ • ”, “ •• ”,
“ ••• ” ( depending on the type of fabric )
(pic. 2), the indicator (7) will light up.
• Set the iron vertically.
• When the sole temperature (1) reaches
the desired temperature value, the indi-
cator (7) will go out, you can start iron-
ing.
IRONING
• If the handle (5) is at a low position, raise
it, it will fix.
• Unwind the power cord and insert the
plug into the socket.
• Set the temperature regulator (8) to the
required ironing temperature
: “ • ”, “ •• ”,
“ ••• ” ( depending on the type of fabric )
(pic. 2), the indicator (7) will light up.
• Set the iron vertically.
• When the sole temperature (1) reaches
the desired temperature value, the indi-
cator (7) will go out, you can start iron-
ing.
• After you finish ironing set the regulator
(8) to the MIN position.
Note: Always unplug the iron, if you are
not going using it even for a short period
of time.
• Pull the plug out of the socket and let the
iron cool down completely.
• Press the button (2) and lower the handle
(5) (pic. 3).
Note:
While using the unit for the first time,
the heating element burns, that is why
smoke or strange smell can appear – it
is normal.
STEAM IRONING
For steam ironing set the temperature regu-
lator to «
••• ».
• If the handle (5) is at a low position, raise
it, it will fix.
• Fill the tank with water as described
above.
• Unwind the power cord and insert the
plug into the socket.
• Set the switch (6) to the steam off posi-
tion.
• Set the temperature regulator (8) to the
required ironing temperature
: “ ••• ” ( pic.
2 ), the indicator (7) will light up.
• Set the iron vertically.
• When the sole temperature (1) reaches
the desired temperature value, the indi-
cator (7) will go out, you can start iron-
ing.
• Switch on the steam supply, by setting of
the switch (6) to the steam supply On po-
sition.
• After you finish ironing set the regulator
(8) to the MIN position, and the switch (6)
to the steam supply Off position .
Note: Always unplug the iron, if you are
not going using it even for a short period
of time.
• Unplug the unit and let it cool down com-
pletely.
• Open the lid (4) and pour out water.
• Press the button (2) and lower the handle
(5) (pic. 3).
ATTENTION!
If during the operation steam is not con-
stantly supplied, check whether the tem-
perature regulator (8) is set properly.
ADDITIONAL STEAM SUPPLY
Additional steam supply function is useful
when ironing folds and can only be used at
high ironing temperatures (when the iron
temperature regulator (8) is set to
“ ••• ”.
When the additional steam supply button
1254.indd 6 1254.indd 6 29.01.2009 14:26:20 29.01.2009 14:26:20