Vitek VT-1232 B Скачать руководство пользователя страница 8

Страница: 8 / 62

ENGLISH

type of fabric by pressing the buttons (12) «-»
and «+». Soleplate heating modes are shown
on the display (11) by temperature indica-
tor (16) or fabric type indicator (17)

; the

indicator (18) will flash during the soleplate
heating (pic. 6).

–

Set the continuous steam supply knob (3) to
the position «

» (steam supply is off).

–

Once the soleplate temperature (14) reaches
the set one, there will be a sound signal, the
indicator (18) will light constantly and you
can start ironing.

–

After you finish ironing, set the low ironing
temperature «

», fabric type «

VELVET

»,

by pressing the button (12) «-».

–

Unplug the iron to switch it off and wait till it
cools down.

STEAM IRONING

The iron has an anti-drip valve that stops water
supply,  if  soleplate  temperature  is  too  low;  it
prevents  dripping  from  the  soleplate  openings
(14).  During  heating  and  cooling  of  the  iron
soleplate  you  will  hear  corresponding  clicks  of
anti-drip valve opening/closing that indicates its
normal operation.

–

Remove the iron from the support (21) and
place it on its base (8).

–

Insert the plug into the socket, the iron handle
illumination will light up, and the water tank
(10) and the display (11) will light up.

–

Set the desired soleplate (14) temperature
(«

», «

») depending on the

type of fabric by pressing the buttons (12) «-»
and «+». Soleplate heating modes are shown
on the display (11) by temperature indica-
tor (16) or fabric type indicator (17)

; the

indicator (18) will flash during the soleplate
heating (pic. 6).

–

Once the soleplate temperature (14) reaches
the set one, there will be a sound signal, the
indicator (18) will light constantly and you
can start ironing.

–

Set the necessary steam intensity with a con-
tinuous steam supply knob (3).

–

Take the iron by the handle, press and hold
the continuous steam supply button (6) (pic.
8), the steam will go out of the soleplate (14)
openings.

–

After you finish ironing, set the low ironing
temperature «

», fabric type «

VELVET

»,

and set the continuous steam supply knob
to the «

» position (continuous steam sup-

ply is off).

–

Unplug the iron to switch it off and wait till it
cools down.

ATTENTION!

If steam is not supplied constantly during the
operation, check whether the soleplate (14)
temperature and steam supply control (3) are set
properly and there is water in the water tank (10).

BURST OF STEAM

Burst  of  steam  function  is  useful  when  ironing
of  folds  and  can  only  be  used  at  high  ironing
temperatures  «

» (fabric types «

COTTON

»,

DENIM

», «

LINEN

»).

When pressing the burst of steam button (4) steam
will go out of the soleplate intensively (pic. 9).

Note:

–

In order to avoid water leakage from steam
openings, press the burst of steam button (4)
with a 4-5 sec. interval.

VERTICAL STEAM

Vertical steam function can be used only at
high ironing temperatures «

» (fabric types

COTTON

», «

DENIM

», «

LINEN

»).

Hold the iron vertically at the distance of 10-30
cm from the clothes, press the burst of steam
button (4) with a 4-5 seconds interval, steam will
be supplied from the soleplate (14) intensively
(pic. 10).

Important information

•

Vertical steaming is not recommended for
synthetic fabrics.

•

To avoid fabric burning, do not touch it with
iron soleplate while steaming.

•

Never steam clothes on a person as the
steam temperature is very high, use a hang-
ers or a stand.

AFTER EVERY USE

–

After you finish ironing, switch off the iron and
wait till it cools down completely.

–

Open the water inlet lid (2), turn over the iron
and drain any remaining water (pic. 11).