Vitek Transcendent VTC-TNB8RFA3-2, Руководство пользователя

Страница: 55 / 78

48
Network Camera User Manual
“rtsp://IP address: rtsp port/profile3?transportmode=mcast”.
Audio : Having entered the main/sub stream in a VLC player, the video and audio will play
automatically.
If “Allow anonymous login…” is checked, there is no need to enter the username and password
to view the video.
If “auto start” is enabled, the multicast received data should be added into a VLC player to play
the video.
Note :1. This camera support local play through a VLC player. Enter the RTSP address (unicast
or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player
to realize the simultaneous play with the web client.
2. The IP address mentioned above cannot be the address of IPv6.
3. Avoid the use of the same multicast address in the same local network.
4. When playing the video through the multicast streams in a VLC player, please pay
attention to the mode of the VLC player. If it is set to TCP mode, the video cannot be played.
5. If the coding format of the video of the mainstream is MJPEG, the video may be
jumbled at some resolutions.
4.6.8
UPNP
If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config
→
Network
→
UPnP. Enable UPNP and then enter UPnP name.
4.6.9
Email
If you need to trigger Email when an alarm happens or IP address is changed, please set the
Email here first.
Go to Config
→
Network
→
Email.
49
Network Camera User Manual
Sender Address : sender’s e-mail address.
Username and password : sender’s user name and password.
Server Address
: The SMTP IP address or host name.
Select the secure connection type at the “Secure Connection” pull-down list according to what’s
required.
SMTP Port
: The SMTP port.
Send Interval(S)
: The time interval of sending email. For example, if it is set to 60 seconds
and multiple motion detection alarms are triggered within 60 seconds, they will be considered
as only one alarm event and only one email will be sent. If one motion alarm event is triggered
and then another motion detection alarm event is triggered after 60 seconds, two emails will be
sent. When different alarms are triggered at the same time, multiple emails will be sent
separately.
Click the “Test” button to test the connection of the account.
Recipient Address : receiver’s e-mail address.
4.6.10 FTP
After an FTP server is set up, captured pictures from events will be uploaded to the FTP server.
Go to Config
→
Network
→
FTP.