Vitec Multimedia VT-1809 B, Инструкция по эксплуатации

Страница: 5 / 48

smoking cigarettes, matches, smolder-
ing ash, fine dust, for example from
plaster, concrete, flour or cinders. It can
lead to serious damages of the motor,
and keep in mind that these cases are
not under warranty.
• Do not use the vacuum cleaner if
- dust bag
- inlet and outlet HEPA-filter are not in-
stalled.
KEEP THIS MANUAL IN AN AVAILABLE
PLACE
PRECAUTIONS
If during vacuum-cleaning the suction
power sharply decreased, switch off the
vacuum cleaner immediately and check
the extension pipe and flexible hose for a
blockage. Switch off the vacuum cleaner
and unplug it, remove the blockage and
then continue the cleaning.
• Do not use the vacuum cleaner near
heat sources, near ash trays and in
places where flammable liquids are
stored.
• Insert the plug in the socket only with
dry hands.
• Before cleaning take away all sharp
objects from the floor in order not to
damage the dust bag.
• While extracting the plug from the socket
hold it by the plug, do not pull the net ca-
ble.
Assembly
Fully unpack the vacuum cleaner and
check for any damages. Before switch-
ing on make sure that the voltage of
the vacuum cleaner corresponds to the
net voltage. Always unplug the vacuum
cleaner and pull the plug out of the sock-
et while changing attachments and dur-
ing preventive measures.
1. Attaching and removal of the flex-
ible hose (pic. 1)
Insert the tip of the flexible hose (4) into
the inlet filter (7) and turn it clockwise.
Insert the hose till it clamps, confirming a
correct connection. To take off the flex-
ible hose press the clamps (5) and de-
tach the flexible hose.
2. Attaching of the extension pipe
and attachments
- Attach the extension pipe (2) to the
flexible hose handle (3).(pic. 2).
Extent the bottom of the extension pipe
for a needed length, after pressing the
clamp button (pic. 2).
- Select the required brush: floor/carpet
brush (1), slit-type attachment (20),
small brush (22) attachment for furni-
ture upholstery (21) and connect it to
the extension pipe (2).
Floor and carpet brush (1) (pic. 4, 5)
Set the switch on the brush at a required
position (depending on the surface type
for cleaning)
Crevice nozzle (20)
For cleaning of radiators, slits, corners
and between sofa pillows.
Attachment for furniture upholstery
(21)
For cleaning fabric surface of uphol-
stered furniture.
Small brush (22)
For removing dust from the surface of the
furniture. Pile on the brush prevents dam-
age of the polished surface of the furni-
ture. Set the small attachment (22) on the
attachment (21).
5
ENGLISH
1809.indd 5 1809.indd 5 07.10.2009 10:54:50 07.10.2009 10:54:50