User Manual, Version 1.0
ii
Declaration of Conformity and Regulatory Compliance
USA: FCC Part 15 Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
WARNING
:
Modifying the equipment without VITEC authorization may result in the equipment no longer complying with FCC
requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and
you may be required to correct any interference to radio or television communications at your own expense.
Canada: ICES-003
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Union - European Economic Area (EEA):
This product fulfills the essential requirements of the below European directives and thus
bears the CE marking.
2004/108/EC
Electromagnetic Compatibility (EMC)
2014/35/EU
Low voltage (LVD)
2011/65/EU
Restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS recast)
The following relevant harmonized standards were used during the assessment process:
