MGW Ace Encoder
HEVC Encoding and Streaming Appliance
User Manual, Version 2.1
60
Parameter
Description
Talkback Mode
Set the talkback mode:
•
OFF
•
Manual: the talkback session is OFF but can be activated in the
dashboard page using the Talkback MIC icon.
Once pressed, the unit attempts to connect to the remote
receiver for 30 seconds.
The talkback session can be stopped clicking the MIC icon.
In this mode, if the session is dropped, MGW Ace Encoder does
not try to reconnect automatically.
•
Auto: The talkback session can be started and stopped as
detailed above.
In this mode, if the session is dropped, MGW Ace Encoder does
try to reconnect automatically.
Target IP Address
Set the talkback receiver IP Address
Target Port
Set the talkback receiver Port
Speaker Audio Output
Gain
Set the audio level output gain
Audio Input Source
Set the audio input source used for the talkback session
Audio Input Gain
Set the audio level input gain
Figure 4-18: The Talkback/IFB screen
NOTE
:
You must click
Apply
for the new settings to be saved.
