Vitec Multimedia FOCUS FS-H60, Руководство пользователя

Страница: 14 / 40

FS-H70 / FS-H60 Portable Recorder
5
3. FS-H70 / FS-H60 CONTrOLS ANd OpErATIONS
3.1 STATUS INFOrMATION
By default, the Home screen displays the following information:
- Clip profile selected (recording resolution and frame rate).
- Device status:
• NO SIGNAL: No video input signal is detected.
• STOP: FS-H70 / FS-H60 has detected a video input and is ready for a recording.
The recorder detects automatically the video input resolution.
• RECORD: record is in progress.
• PAUSE: record is in pause mode
• NO SD CARD: No SDHC is inserted.
• UNLOCK SD CARD: The SDHC card is write protected.
• NO FREE SPACE: The SDHC card is full.
3.2 AddITIONAL STATUS INFOrMATION
From the Home screen, press and HOLD OK (for 3 seconds) to enter and cycle through the Status
Information Menus.
• Battery Level:
Note: FS-H70 / FS-H60 will display a warning when the remaining battery falls to 10%.
If the battery is low and the unit must power down, to maintain clip integrity, the unit will stop and end
the recording in progress (if any is taking place) before shutting down.
• Video Input: displays the detected video input resolution and frame rate.
• Time and Date display
• IP address of the recorder (if using the Wi-Fi dongle or ethernet adapter)
Quick Start
1920x1080 29.97
STOp
Clip resolution
Proxy frame Rate
Device Status
bATTEry LEVEL:
[XXXXXXXX ] 80%
VIdEO INpUT
1280x720 29.97
Resolution
Frame Rate