Vitea Care DRVM6C, Инструкция по эксплуатации

Страница: 66 / 76

66 viteacare.com
4. Connect the charger to the charging socket.
5. Connect the charger to grounded socket, remember to check whether the socket
has proper voltage - 115V/230V.
6. Turn on the charger (red - the battery is low, yellow - the battery is half charged,
green - the battery is fully charged).
In case when LEDs flesh in an irregular manner, turn the charger off. Check the
connection of the charger and reconnect the charger. In case when the charging
procedure will proceed without complications, diodes marking the battery
charge level will light up (as described above).
7. The optimal charging time takes 5-6 hours (in winter it lasts slightly longer).
8. When charging is finished, disconnect the charger from the socket, and then take
the plug out of the charging socket.
Problems related to the charging process
1. Lack of voltage indication after connecting the charger.
• Check the connection of power cords.
• Check the connection socket of the charger.
• Check the functioning of the ventilator.
2. Red and yellow LEDs on the battery charge indicator are lighten up, but the venti-
lator does not turn on, despite the fact that the power is on.
• Check whether the charger is properly connected to the batteries.
3. Red LED on the battery charge indicator lights up permanently and the green LED
flashes, lack of charging signal despite the fact that the power is on.
• Check the antipolarising fuse.
• Check the connection with batteries.
• Check the polarisation of batteries.
• Check whether the batteries are properly located.