Vitax Supaturf, Руководство оператора

Страница: 9 / 12

9
SECTION 5: EMPTYING AND CLEANING
1. Emptying the ARROW:
The ARROW has a unique tip tank feature that enables quick and effective emptying of the tank.
Once marking out has been completed, take a suitable receptacle and place it at the rear of the
ARROW. Release the tank from the chassis and raise it so that it is in its upright position. This sees
the tank in a completely vertical position and enables any unused line marking liquid to be drained
from the tank via the round tank-emptying aperture at the rear and top of the tank. The design of the
chassis ensures that, in this position, the tank cannot flip completely through the handle bar assembly
and cause any damage to the machine, or create a potential spill of line marking liquid or injure the
operator.
Important information:
Depending on the amount of line marking liquid left in the tank after marking has been
completed, it may be necessary to ensure a firm hold on the handle of the ARROW when the tank
is tipped to the emptying position, to prevent the whole machine tipping over backwards.
After removing as much unused line marking liquid from the tank as possible, the tank can now be
removed from the chassis and tipped by hand until any line marking liquid has been drained. Any
residue of line marking liquid can be stored; ready for use the next time marking out is undertaken.
The tank attaches to the chassis by a hook and lug moulding and simply snaps on and off the rear
axle of the main chassis.
ARROW with tank in the raised position for emptying